["我们的产品在出厂时已配备详细的操作手册与安装指南。请先仔细阅读对应产品的安装说明，确认安装环境符合要求。如需现场技术支持，请联系我们的售后服务团队。","Our products are equipped with detailed operation manuals and installation guides upon leaving the factory. Please read the installation instructions of the corresponding product carefully to ensure that the installation environment meets the requirements. If you need on-site technical support, please contact our after-sales service team."]

["设备支持多种联网方式：4G蜂窝网络、LoRaWAN、NB-IoT等。具体方式取决于产品型号，请参考产品说明书中的网络配置章节进行设置。","The equipment supports multiple networking methods: 4G cellular network, LoRaWAN, NB-IoT, etc. The specific method depends on the product model. Please refer to the network configuration section in the product manual for setting instructions."]

["安装位置整改\n远离厨房灶台、浴室、开水器，避开蒸汽、油烟；距离出风口至少 1.5m。\n不要安装在尖角屋顶、墙角气流死角。\n避免粉尘大的车间，粉尘环境建议改用温感。\n维护清洁\n定期吹扫迷宫内部灰尘；防止小虫飞入迷宫，部分产品可加防虫网。\n电池款：低电量会产生异常鸣叫，及时更换电池，电压跌落会诱发采样误报。\n环境规避\n蒸汽、水雾等环境。","Installation location rectification\nKeep away from kitchen stoves, bathrooms, water heaters, and avoid steam and smoke; maintain at least 1.5 meters from the exhaust vent.\nDo not install on sharp roof corners or corners with air flow dead zones.\nAvoid workshops with large amounts of dust. For dusty environments, it is recommended to use temperature sensors instead.\nMaintenance and cleaning\nRegularly clean the dust inside the labyrinth; prevent small insects from entering the labyrinth; some products can be equipped with insect-proof nets.\nBattery models: Low battery levels will cause abnormal beeping; replace the battery in time; voltage drop may trigger sampling false alarms.\nEnvironmental avoidance\nSteam, water mist, etc."]